Screeds and Paving
Screeds
Micro-Screeds
Screeds Hardening
| Product | Definition and field of application | Consumption | Packaging |
|---|---|---|---|
HARDFLOOR L |
Ready-to-use liquid surface hardener. Reduces dust. Single-component made up of an emulsion of resin and active minerals. To be applied by spraying, brush or roller onto surface. It hardened by reaction after drying and the cement brings about a large reduction in dust, porosity and capillarity of the substrate. It increases chemical resistance against oils, organic acids and diluted bases. Used for superficial reinforcement of screeds and concrete slabs and the protection of facings and limestone. | 0.15 to 0.3 L per m² 1 L for 3 to 7 m² |
220 L drums 30 L casks 5 L cans |
MORTAR IHR |
Hydraulic mortar and synthetic resin-based kit for high-resistance industrial screeds. Mixed system (binder + synthetic resin) for screeds which are subjected to significant mechanical and chemical constraints. To be applied to concrete pavement and prefabricated concrete. Can be applied inside and outside for applications of thickness of 3 to 12 mm. Can be left unfinished or can be covered with floor paint, epoxy resin or tiling. Colour: Grey |
2 Kg per m² per mm of thickness | 29.3 Kg Kits (powder + resin) |
MORTAR IHR MONO |
Leveling and finish mortar. Self-leveling, reinforced and ready-to-use. Used for making high-resistance industrial screeds which are subjected to significant mechanical and chemical constraints. To be applied to concrete pavement and prefabricated concrete. Can be applied inside and outside for applications of thickness of 3 to 12 mm. Can be left unfinished or can be covered with floor paint, epoxy resin or tiling. Colour: Grey |
1.8 Kg per m² per mm of thickness | 25 Kg bags 12.5 Kg casks 6 Kg cans |
FLOX MORTAR |
Epoxy coating without solvent, non-shrinking, anti-skid, intended for making sealed screeds (of thickness of more than 7 mm), durable, without joints, with excellent mechanical and chemical resistance. Used for industrial anti-dust, food service quality floors. Colours: Concrete Grey, Light Grey, Brick Red, Swimming Pool Blue, Green, Pastel Green, Sand Yellow and Straw Yellow |
2.05 Kg per m² per mm of thickness | 20 Kg and 5 Kg Kits |
FLOX MORTAR LS |
Epoxy coating without solvent, non-shrinking, intended for making smooth waterproof and durable screeds with excellent mechanical and chemical resistance. Used for industrial anti-dust, food service quality floors. Colours: Concrete Grey, Light Grey, Brick Red, Swimming Pool Blue, Green, Pastel Green, Sand Yellow and Straw Yellow |
1.75 Kg per m² per mm of thickness | 20 Kg and 5 Kg Kits |
HARDFLOOR |
Coloured hardened aggregates for concrete paving. Recommended for high traffic areas. Resistant to hydrocarbon, oils, water. Anti-skid, antidust, anti-wear and tear. Colours: Grey, Red, Green |
4 to 5 Kg per m² | 50 Kg bags |
HARDFLOOR PREMIX |
Coloured hardening quartz aggregates for screeds. Can resist strong and heavy traffic (strength: 7 on MOHS scale). Ready-to-use. Can be applied inside or outside. Colours: Grey, Green, Red and Yellow |
4.5 to 6 Kg per m² | 30 Kg bags |
